The Turnigy 30 Amp Brushed ESC has a linear throttle curve, LiPo/NiMh ready and programmable braking.
If you have an old can motor sitting around which you want to put to good use, this ESC will be perfect.
- Break function is turned On/Off using a jumper.
- Battery type is chosen using a jumper.
- Low voltage cut-off for LiPo 3.0v per cell.
- PWM frequency 2KHz.
- Over heat protection over 110 C.
- Throttle signal loss for 1 sec will gradually reduce the output power, after 2 sec throttle is completely cut.
- Constant Current: 30 Amp.
- Burst Current: 40 Amp.
- BEC Mode: 5 volts / 1 Amp.
- LiPo Cells: 2 - 3.
- NiMH Cells: 4 - 10.
- Weight: 21 grams.
- Size: 45 x 21 x 8mm.